SR EN RU

Y BEARING UNITS

LEGS 211 2F.H

Housing units LEGS, four-bolt flanged housing units, cast iron, centring spigot, grub screw in inner ring, F seals

Application: Universal Solution

3D view

Technical Specification
dBore diameter55mm
DaCentering diameter125mm
LDiameter of housings185mm
ADistance from the housing flange to the front of the inner ring of the bearing33.4mm
A1Housing flange thickness15mm
A2Height of the housing27.5mm
JPitch circle diameter150mm
NHole diameter18mm
BWidth inner ring 55.6mm
kgMass3.074kg
CdynDynamic load rating43.6kN
CoStatic load rating29kN
PuFatigue load limit1.218kN

Tehnical Drawing

Sealing

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Sealing Drawing

LEGS 211 2F.H

×

LEGS 211 2F.H

×

Sealing Type:

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal

LEGS 211 2F.H

×