SR EN RU

203KRR.AH05

Ball Bearing

Application: Seeding Machine; Sprocket

3D view

Technical Specification
dBore diameter13mm
DOutside diameter 40mm
BWidth inner ring 18.29mm
CD-shape hole cut out dimension12mm
kgMass0.09kg
CdynDynamic load rating9.5kN
CoStatic load rating4.75kN
PuFatigue load limit0.2kN

Tehnical Drawing

Sealing

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Sealing Drawing

203KRR.AH05

×

203KRR.AH05

×

Sealing Type:

Single seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing.

203KRR.AH05

×