SR EN RU

Y BEARING UNITS

LEGS 215 2F.C77.8

Housing units LEGS, four-bolt flanged housing units, cast iron, centring spigot, grub screw in inner ring, F seals

Application: Universal Solution

3D view

Technical Specification
dBore diameter75mm
DaCentering diameter160mm
LDiameter of housings220mm
ADistance from the housing flange to the front of the inner ring of the bearing44.5mm
A1Housing flange thickness18mm
A2Height of the housing32mm
JPitch circle diameter184mm
NHole diameter18mm
BWidth inner ring 77.8mm
kgMass5.446kg
CdynDynamic load rating66.3kN
CoStatic load rating49kN
PuFatigue load limit2.058kN

Tehnical Drawing

Sealing

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Sealing Drawing

LEGS 215 2F.C77.8

×

LEGS 215 2F.C77.8

×

Sealing Type:

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal

LEGS 215 2F.C77.8

×