Y BEARINGS

UE 206-104 2S

Y-Ball Bearings With Grub Screw Locking

3D view

Technical Specification
d	Bore diameter	31.75	mm
d	Bore diameter	1 1/4	inch
D	Outside diameter	62	mm
B	Width inner ring	30.2	mm
C	Width outer ring	18	mm
s	Distance from inner ring side face to raceway centre	9.2	mm
d1	Outer diameter inner ring	39.7	mm
E	Distance from raceway centre to the hole for lubrication	5.1	mm
Gs	Set screw	1/4-28 UNF	inch
sw	Hexagonal key size for set screw	3.175	mm
r1,2	Inner ring Chamfer dimension	0.6	mm
r3,4	Outside ring Chamfer dimension	0.8	mm
Cdyn	Dynamic load rating	19.5	kN
Co	Static load rating	11.3	kN
Pu	Fatigue load limit	0.475	kN
kg	Mass	0.22	kg

Tehnical Drawing

Sealing

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Sealing Drawing