›
Products
HARVESTER
UH 206/25 2T.H.T
Y-Ball Bearings With Integral Adapter Sleeve
Application: Harvester
3D view
| d | Bore diameter | 25 | mm |
| D | Outside diameter | 62 | mm |
| W | KM nut outside diameter | 45 | mm |
| D2 | MB Washer outside diameter | 49 | mm |
| B | Width inner ring | 28 | mm |
| B1 | Width adapter sleeve | 38 | mm |
| C | Width outer ring | 18 | mm |
| L | KM nut width | 7 | mm |
| E1 | Distance from raceway center to the stopping pin | 5 | mm |
| M | Thread adapter sleeve | M30x1.5 | mm |
| P | Stopping pin diameter | 3 | mm |
| P1 | Stopping pin higth | 2 | mm |
| kg | Mass | 0.36 | kg |
| Cdyn | Dynamic load rating | 19.5 | kN |
| Co | Static load rating | 11.2 | kN |
| Pu | Fatigue load limit | 0.475 | kN |
Tehnical Drawing
Sealing
T SEAL / T SEAL (2T)
3-lip seal on the both side of the bearing, provides equal protection against contamination. Recommended for application where the possibility of contamination is the same on the both side.
Sealing Drawing
