SR EN RU

UY 206 2S

Y-Ball Bearings With Eccentric Locking Collar

3D view

Technical Specification
dBore diameter30mm
DOutside diameter 62mm
BWidth inner ring 23.8mm
C Width outer ring 18mm
sDistance from inner ring side face to raceway centre 9mm
d1Outer diameter inner ring 39.7mm
EDistance from raceway centre to the hole for lubrication 5.1mm
GsSet screw M8x1mm
swHexagonal key size for set screw 4mm
r1,2Inner ring Chamfer dimension0.6mm
r3,4Outside ring Chamfer dimension0.6mm
B1Width inner ring with locking collar35.7mm
d2locking collar oiutside diameter44.2mm
B2Width locking collar16mm
CdynDynamic load rating19.5kN
CoStatic load rating11.2kN
PuFatigue load limit0.48kN
kgMass0.3kg

Tehnical Drawing

Sealing

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Sealing Drawing

UY 206 2S

×

UY 206 2S

×

Sealing Type:

Single seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing.

UY 206 2S

×