SR EN RU

LYGS 308 2F

Housing units LYGS, four-bolt flanged housing units, cast iron, centring spigot, F seals

Application: Harvester Solution

3D view

Technical Specification
dBore diameter40mm
DaCentering diameter115mm
LDiameter of housings194mm
ADistance from the housing flange to the front of the inner ring of the bearing41.9mm
A1Housing flange thickness18mm
A2Height of the housing27mm
JPitch circle diameter158mm
NHole diameter19mm
BWidth inner ring 57.2mm
kgMass3.721kg
CdynDynamic load rating41kN
CoStatic load rating24kN
PuFatigue load limit1.008kN

Tehnical Drawing

Sealing

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Sealing Drawing

LYGS 308 2F

×

LYGS 308 2F

×

Sealing Type:

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal

LYGS 308 2F

×