SR EN RU

206KRR6

Hexagonal Bore Series With Cylindrical Outer Ring

3D view

Technical Specification
DOutside diameter 62mm
BWidth inner ring 24mm
C Width outer ring 16mm
d1Outer diameter inner ring 39.7mm
aShaft size25.43mm
CdynDynamic load rating19.5kN
CoStatic load rating11.3kN
kgMass0.34kg

Tehnical Drawing

Sealing

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Sealing Drawing

206KRR6

×

206KRR6

×

Sealing Type:

Single seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing.

206KRR6

×